HYG series Pipe Benders is specially designed for production bending radius above R = 3 times benders.
The 6D Pipe Benders we supplied can process the following pipe:
Min bending radius R=2.5D Max. bending radius R=6D Max. process diameter: OD 325mm Min. process diameter: OD 89mm Min. process thickness: 6mm Max. process thickness: 18mm
Thepipe bender is composed of host machine and medium frequency heating power. Host machine used hydraulic transmission, it's easy to achieve fast conversion between fast pushing-fast return and feeding speed, and randomly to adjust the pushing force. Stable working with low noise, no pollution. We can also adjust the process specification of the products. It's convenient and reliable, low failure rate.
Noticement on machine parts: 1. Idler wheel needs to be injected butter one time for each 5 days 2. Entrust wheel under front idler wheel case shall be inject butter one time for each 24 hours since it is near by heating coils. 3. Shift arm spindle shall be injected butter one time per year, running gear on rail, pipe wheel leading gear shall be injected oil one time for each 2 years since less speed of roll attrition. 4. Please clean up the seat of shift arm and inject butter to keep wet when adjusting bending radius, 5. Each active parts on flameout transformer and screwed poles shall be injected butter one time for each two days 6. Please check fastners of main machine each month and ensure that they are in a tighten situation all the way 7. Please return oil vat's piston pole to terminal to refuse hitting on piston pole if equipment is not use. 8. Please give a empty trial running after a long stop of equipment ,ensure that it is in a right working situation.
