Hei Yan group specialized in manufacturing bender machinery.

Bender machinery Features:

1. Function of Manual, Automatical
2. Automatic bending sheet in schedule time in automatic state
3. Softening crevice can be adjust according to the thickness of tubes
4. Fixed heating plate,avoiding deformation.
5. Infrared heating can prolong working life than fumace hot filament
6. Adjust the angle by the handwheel, more convenient, accurate and ensure that the unity of mass production
7. Temperature and working voltage can be adjusted according to the material and thickness.
8. Water circulation protecting configuration. Overheating temperature alarm to ensure the safety.
9. Leakage production fuction makes the machine more secure
10. Supporting to bend arc

Welcome to visit our factory to know more information about bender machinery.our company also professionally manufacture elbow forming machine,pipe expanding machine,medium requency,hydraulic press,beveling machine and so on.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also