Bending Pipe Mill

Bending pipe mill:
 
1. Product Catalogue: Bending pipe R=5D

2. Size: From 1/2" to 30" (Seamless pipe fittings and Seam pipe fittings)

3. Wall thickness: Sch5-Sch160, XXS

4. Standard: ISO, ANSI, JIS, DIN, GB/T12459,GB/T13401,ASME, ASTM,.SH3408 SH3409, HG/T21635,HG/T21631,SY/T05010

5. Material: carbon steel, alloy steel, stainless steel

6. Special design available as the requirements of customer

7. Packing: wooden cases and pallets

Hei Yan also manufacture elbow forming machine, pipe expanding machine, hydraulic press and some accessories (medium frequency,beveling machine,heating coil).Welcome you to visit us for more informaiton of pipe bending machine.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.