Carbon steel pipe hot bender
This Carbon steel pipe hot bender we supplied can produce bending radius over R=2.5 times,180 degree bending pipe fittings. With reasonable design, reliable working, it's easy to operate.

Specification of Carbon steel pipe hot bender:
1. Production range: OD21mm-1420mm
2. Radius: 2.5D-10D
3. Thickness: 10mm-80mm
4. Material: Carbon steel, Alloy steel, Stainless steel
5. Drive type: Hydraulic, chain

Carbon steel pipe hot bender is composing by:

hydraulic bending pushing machine, bending degree adjustment device, hydraulic pump, medium frequency heating system, operate panel, control panel of generators, panel of capacitors ,water cable, reactor. Cutomer shall purchase coils, pipe clamps according to machine sizes.

Pipe Induction Bending Machine's following parts need cycle cooling: silicon-controlled rectifier ,medium frequency heating coil, compensation capacitors, water cable, reactor

Please kindly contact with us for your interested elbow forming machine,pipe bending machine,pipe expanding machine,hydraulic press, hot induction heating power.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.