Fitting bending machineworking principle is adopting the medium frequency power to heat, bend the pipe when some parts of the pipe are heated. 1.This machine we supplied can produce the range of pipe specifications: OD: 76mm- 1420mm, thickness: 4mm-120mm. 2.Raw material the machine can process: seamless steel pipe, welded steel pipe, or rolled steel pipe Operation of Fitting bending machine
Adjust radius of bending Loosen bolt of arm axes, set up control pump, control oil vat will push arm axes to pipe (material),center distance is from pipe center to arm axes center. turn back flashboard,Screw bolt of am axes and choose suitable coils to tight pipe (material),finally screw arm pole bolt. More information of our Fitting bending machine,please contact with us
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com
Noticement on machine parts: 1. Idler wheel needs to be injected butter one time for each 5 days 2. Entrust wheel under front idler wheel case shall be inject butter one time for each 24 hours since it is near by heating coils. 3. Shift arm spindle shall be injected butter one time per year, running gear on rail, pipe wheel leading gear shall be injected oil one time for each 2 years since less speed of roll attrition. 4. Please clean up the seat of shift arm and inject butter to keep wet when adjusting bending radius, 5. Each active parts on flameout transformer and screwed poles shall be injected butter one time for each two days 6. Please check fastners of main machine each month and ensure that they are in a tighten situation all the way 7. Please return oil vat's piston pole to terminal to refuse hitting on piston pole if equipment is not use. 8. Please give a empty trial running after a long stop of equipment ,ensure that it is in a right working situation
