Hot induction heating bending machine

Hot induction heating bending machine working principle is adopting the medium frequency power to heat, bend the pipe when some parts of the pipe are heated.

Production range of the pipe bending machine :OD21mm-1420mm, Thickness:Thickness: 10mm-80mm Radius: 2.5D-10D
The whole equipment is composed of host machine and medium frequency heating power.

Notes of operating Hot induction heating bending machine:
1.Before working, the workers must correctly wear working protective device.
2.Check whether the protective device is well of the bending machine, if not, don't start. Pipe bending machine should be connected with the ground, insulating with electric device, the voltage should be stable.
3.Check the machine's lubricant part, when is shortage of oil or no oil, should plus the oil enough.

Hei Yan also manufacture pipe expanding machine,elbow forming machine,hydraulic press,tee machine,hot induction heating equipment.

Tips for Pipe bending machine

1, Please note hunman body shall not enter arm rotating scope.
2, When the machine works, all personnel are prohibited enter the space which turn arm and fittings swept.
3, Under normal circumstances, change hydraulic oil the and filter.
4, When adjust machine or operate empty car, It should be unloaded core pole.
5, When finishing the operation, cut off the power supply, do the cleaning job