Hot radius bender

The Hot radius bender Medium current frequency can produce bending radius over R=2.5 times, 180 degree bending pipe fittings, With reasonable design, reliable working, it is easy to operate.

Hot radius bender Medium current frequency consists two parts: host and medium frequency heating power.

Specification:
1. Production range: OD21mm-1420mm
2. Radius: 2.5D-10D
3. Thickness: 10mm-80mm
4. Material: Carbon steel, Alloy steel, Stainless steel
5. Drive type: Hydraulic, chain

The heating system of pipe bending machine we adopts medium frequency heating source, its power and frequency all can be adjusted, then can make sure the suitable diathermy depth, to ensure the stability of steel tube material properties, intermediate frequency power factor above 0.95 , save energy, new design, compact structure, automation and production efficiency.

Welcome to visit Hei Yan, we would like to show our elbow forming machine, pipe expanding machine,Hot radius bender,tee machine, hydraulic press and the assorted beveling machine, mould to you.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.