PIPE BENDING MACHINE

Hei Yan supply a series of pipe bending machine

 Components of pipe bending machine
  Main machine body 
  Heating coils bracket
  Radius rail   
  Big rotating arm    
  Small rotating arm  
  Main clamping apparatus: OD 1219(OD1016 OD 914 OD 812 OD 711 OD 610)  
  Main clamping apparatus: OD 508 (others: OD 457  OD406 ) 
  Hydraulic system:  
  Electrical system:  
      Medium frequency power supply  600KVA  
      Quenching transformers 3000KVA    1set
      Heating coils: OD1016  OD 914 OD 812 OD 711 OD 610 OD508 OD 457  OD 406          
      Main control cabinet(low voltage electric apparatus)    

We also supply elbow machine,tee machine,pipe expanding machine,hydraulic press.     

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.