Induction pipe bender China

1.This Induction pipe bender we supplied can produce the range of pipe specifications: OD: 76mm -1420mm, thickness: 4mm -120mm.
2.Raw material the Induction pipe bender can process: seamless steel pipe, welded steel pipe, or rolled steel pipe
3.Bending radius and angle can be arbitrarily adjusted according to user needs, the minimum bend radius 3D, bending angle 0 degree -180 degree.

The Induction pipe bender consists of the following components: hydraulic pipe pushing machine, bending radius of the angle adjustment device, hydraulic pump, the total console, motor control cabinets, medium frequency power,capacitor cabinets, water cable, electric choke. Customers should order induction coils and steel chuck according to the products you want to make.

Please contact with us for more information of Induction pipe bender.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if

the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate

normal, if working normally, then you should check whether the electro-hydraulic relief valve or the

one-way unloading valve has contaminant that made it could not working or not(this phenomenon

usually happen when you just use this machine). If has contaminant, you should open it, clean by

gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.