|
|
| Induction tube bender |
|
| Type:HYG series |
| Specification:OD21mm-1420mm |
| Application:petroleum,chemical,construction ,water conservancy and other fields |
| Delivery:30-60days |
 |
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Induction tube bender
Induction tube bender is designed for producing various specification carbon steel, stainless steel benders. It also can be used to produce square benders, bending bar, channel steel,
Production range of the Induction tube bender:OD21mm-1420mm, Thickness:Thickness: 10mm-80mm Radius: 2.5D-10D
This type machine is used to factory, stowage, port, construction, railway, car??£¤s repair.
Working principle of Induction tube bender:
Put the raw material pipe on the pipe bending machine with a clamping roller clamp, put induction heating coil in front of the raw steel, steel front using steel plate clamp, and fixed on the bend radius arm. Activate the cooling water pump, start medium frequency power, make the raw material tube local heating, start bending machine hydraulic system, then the raw material tube can slowly moving forward, it starts bending.
Hei Yan also manufacture pipe expanding machine,elbow forming machine,hydraulic press,tee machine,hot induction heating equipment.
|
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
Item |
Max. bending diameter (mm) |
Max. thickness (mm) |
Cylinder quantity(pc) |
Max. pushing force(ton) |
Medium frequency power(KW) |
|
1 |
1420 |
20 |
2 |
337 |
700-800 |
|
2 |
1220 |
20 |
2 |
300 |
600-650 |
|
3 |
1020 |
20 |
2 |
258 |
550-600 |
|
4 |
820 |
20 |
2 |
203 |
500-550 |
|
5 |
720 |
20 |
2 |
160 |
450-500 |
|
6 |
630 |
20 |
2 |
130 |
400-450 |
|
7 |
530 |
14 |
2 |
106 |
350-400 |
|
8 |
426 |
14 |
2 |
84 |
300-350 |
|
9 |
325 |
14 |
2 |
65 |
200-250 | |
|
|
|
|
Maintenance of machine:
The equipment should be serviced about once a month, maintenance as following:
1.Check each part of fasteners, ensure they are fixed.
2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.
3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.
4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.
5.When cleaning tank, you should clean the inside the oil filter of tank also. | |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
