The specifications that the Tube bending machine can produce: OD 108-1420mm, thickness: 5mm-120mm The bending radius and angle can be adjusted according to customer's need. Raw material of the Tube bending machine: seamless steel pipe, welded steel pipe or roll pipe. OPERATION ON Tube bending machine
load materials Load material from the end of machinery, pipe (material) shall over than frequency coil ( subject to width of clips) .First adjust height of conveyor idler and keep necessary level with pipe , then screw conveyor idler and make pipe in center of the hole. Transformer coils have equal distance around pipe (material),then turn back pushing board and screw pipe and ready to bend. Hei Yan also manufacture pipe expanding machine,elbow forming machine,hydraulic press,tee machine,hot induction heating equipment.
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com
Noticement on machine parts: 1. Idler wheel needs to be injected butter one time for each 5 days 2. Entrust wheel under front idler wheel case shall be inject butter one time for each 24 hours since it is near by heating coils. 3. Shift arm spindle shall be injected butter one time per year, running gear on rail, pipe wheel leading gear shall be injected oil one time for each 2 years since less speed of roll attrition. 4. Please clean up the seat of shift arm and inject butter to keep wet when adjusting bending radius, 5. Each active parts on flameout transformer and screwed poles shall be injected butter one time for each two days 6. Please check fastners of main machine each month and ensure that they are in a tighten situation all the way 7. Please return oil vat's piston pole to terminal to refuse hitting on piston pole if equipment is not use. 8. Please give a empty trial running after a long stop of equipment ,ensure that it is in a right working situation
