Hei Yan group manufacture Bevel Machine.

Bevel machine is a part of the metal processing field.

It is composed of permanent seat, sliding seat, delivery mechanism, centring mechanism, pneumatic clamp mechanism, screw rod transmission mechanism, tool apron mechanism and so on.
The centring mechanism consist of hydraulic motor, gear, rack,draw bar. The Steel plate is installed on the sliding seat, which enabling the both sides of steel plate have equal allowance.the utility model one-way planing tool amount up to 6mm.the machine can bevel bilateral steel plate simultaneously.
The machine advantages are high planing amount, high cutting efficiency and precise groove roughness degree etc.
This machine can ensure the required bevel angle steel, steel processing of size and technical requirements before forming.

Application:
The bevel machine can process carbon steel,stainless steel, heat-resistant alloy steel,wall thickness has reached 150mm.

We can supply various bevel machines according to customer's requirement.

We supply elbow machine,hydraulic press,tee machine also.

Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
   please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
   pipe end and the feedings should be left between the 2-3mm gap,to prevent
  excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
   which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work.