|
|
| Beveling machine for elbow pipe bender |
|
| Type:HYP series |
| Specification:OD16-1500mm |
| Application: Used in petroleum,chemical,construction,water conservancy and other fields. |
| Delivery:30-45days |
 |
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Manually operated beveling machine
Hei Yan supply Beveling machine for elbow pipe bender
Beveling machine for elbow pipe bender is widely used for butt weled elbow,tee,bender and pipe beveling.
Beveling machine for elbow pipe bender is combined by Main bracket,Working panel,Generator,gear box ,working wheel.
Beveling machine for elbow pipe bender is a multifunction machine,It can support beveling work for elbow,tee,pipe,
bender in the same machine,you need to change working table only for different products,for example:
Pipe Beveling: except the main working table,we need two brackets to support pipe also.
Elbow Beveling: we need a big working table to make elbow lay on it.
Bending beveling: Except the main working table,we need one extra bracket to support another bender end.
Adaptive working scope of Pipe fittings: OD80-OD1420
Thickness: 3mm-22mm ( thickness depend on size,confirm the thickness by real requirement)
Beveling machine for elbow pipe bender
is a convenience,economic machine.With easy operating,High working efficiency characters,
It is widely adopted by users home and abroad. |
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
Mode |
Beveling range |
Beveling thickness |
Rotating speed |
Weight of main machine body |
|
HYP-16 |
OD 16-28 |
3-15mm |
58rpm |
5kg |
|
HYP-28 |
OD 28-76 |
3-15mm |
55rpm |
7kg |
|
HYP-65 |
OD 65-159 |
3-20mm |
34rpm |
16kg |
|
HYP-80 |
OD 80-273 |
20mm-75mm |
16rpm |
38kg |
|
HYP-150 |
OD 150-351 |
20mm-75mm |
14rpm |
42kg |
|
HYP-300 |
OD 300-630 |
15mm-75mm |
10rpm |
55kg |
|
HYP-600 |
OD 600-850 |
15mm-75mm |
8rpm |
65kg |
|
HYP-820 |
OD 820-1050 |
15mm-75mm |
7rpm |
80kg |
|
HYP-1030 |
OD 1030-1300 |
15mm-75mm |
5rpm |
90kg |
|
HYP-1270 |
OD 1270-1500 |
15mm-75mm |
4rpm |
100kg | |
|
|
|
|
Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
please pay attention to check the operation direction and transmission parts.
2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
pipe end and the feedings should be left between the 2-3mm gap,to prevent
excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.
3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
which away from the cutting surface,and then remove the pipe.
4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.
5 After finished the work,need do maintenance work. | |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
