Elbow modifying machine:

Elbow (both end)modifying machine series specializes in cutting , crevassing and polishing the elbow produced by forming machine.

Elbow modifying machine contains novel- structured floating cutter support, well and
truly oriented workpiece clamp and excellent hydraulic feed lock device to ensure
normal orquick forward/ backward movement of the workpiece on the slipway.

There are three cutters for each clamp disk, they serve for different range of
work and can work at same time to insure the effective cutting and fully satisfied
the stable requirements of the guide track. With the hydraulic control system
its cutting speed can be adjusted easily by the size and the thickness of the
caliber.

Elbow modifying machine is popular for its High power, exellent cutting performance and stability. Also, we take pride in its compact structure, friendly operating system and good look.

If you are interested in our Elbow modifying machine, don't hesitate to contact us. Hei Yan also supply elbow forming machine,pipe bending machine,pipe expanding machine,cold draw tee machine,hydraulic press,medium frequency power supply,moulds and so on.

Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
   please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
   pipe end and the feedings should be left between the 2-3mm gap,to prevent
  excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
   which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work.