Electric Bevelling Machine
General introduction:
The electric bevelling machine can be widely used in pipe fitting making industry,pipeline installation industry in power plant station,petrochem,oil,shipbuilding industry,which is key equipment in pipe fitting making area,and before welding in pipeline projects.
The electric bevelling machine is equipped with various clamps,thus bevelling OD219~OD 1420 pipe or elbow,equipped with angleing cutter to bevel wall thickness beyond 14mm high pressure pipeline,equipped with drifting knife to bevel wall thickness under 16mm low pressure pipeline.
The electric system is integrated on one panel for easy operation,the electric bevelling machine is renowned for competitve price,large bevel range,good quality.
The cutter plated is equipped with angleing cutter and drifting knife,there is need to adjust the shelf according to different diameter,thus can bevell well.The angleing cutter shelf is driven by different spped,meanwhile the drifting knife must be disloaded or moved not to affect the bevell operation
Hei Yan Group in Cangzhou,China devoted itself to manufacture qualified pipe fitting machine.Electric bevelling machine,hydraulic elbow machine,hot expansion machine,induction heater,induction pipe bending machine enjoy reputation in home and aborad,like India,Turkey,Russia,Canada etc.

Notes for electric bevelling machine

1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the    pipe end and the feedings should be left between the 2-3mm gap,to prevent excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work.