OD-Mount electric pipe cutting and beveling machine

Main characteristic of electric pipe cutting and beveling machine:

It's convenient to use, more powerful than air type.

Main performance
Cut range: OD25-1500m
Cold cutting and beveling
Lower axial and radial clearance
Tool feed automatically
can be process different material pipe: carbon steel, stainless steel and alloy steel
The split frame design allows it to separate mount the OD of the in-line pipe for strong stable clamping

We are specialized in manufacturing electric pipe cutting and beveling machine,elbow machine,hydraulic press,pipe bending machine,please contact us.

Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
   please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
   pipe end and the feedings should be left between the 2-3mm gap,to prevent
  excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
   which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work.