Pipe beveling machine

Pipe beveling machine is used in pipe making,pipe installation in power station,oil industry, chemical industry,shipbuilding industry. It is the key equipment using for pipe making and pipe welding of the head of pipe.

There are three cutters for each clamp disk. Pipe beveling machine serve for different range of work and can work at the same time to insure the effective cutting and fully satisfied the stable requirements of the guide track. With the hydraulic control system its cutting speed can be adjusted easily by the size and the thickness of the caliber.

We bear in mind that "quality first, credit first, service first" since we opend the company, Sincere cooperation lay a solid foundation for success, welcome to visit our company from all over the world! Pipe beveling machine ,hydraulic bending machine, hydraulic tee machine, intermediate frequency, four columns hydralice press, stainless steel elbow machine, elbow machine, .

Notes for Pipe beveling machine

1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
pipe end and the feedings should be left between the 2-3mm gap,to prevent excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work.