Tube cutting and beveling machine:

Tube cutting and beveling machine Main characteristic:

This machine, pipe cut and bevel pipe tool adopts the high-performance electrical motor to drive, pass the bearing transmission on rotating the guide inclusive of round ring, rigidity is good, the precision is high; With Last scale knife rest, this pipe cutting and bevelling machine can operate at angle not wanton, and can feed automatically, and this lathe is safe and reliable to use.

Contrast with flame cutting, Tube cutting and beveling machine has well advantages such as low energy consumption, quick beveling speed (more than times of flame cutting), unnecessary to clean burr. No need to clamp the workpiece while beveling, easy using & high efficiency. The machine is the best ideal beveling machine before plate is welded, and length and width of equipped carriage can not be limited.

Welcome to visit Hei Yan to know more information about Tube cutting and beveling machine.our company can supply elbow forming machine,bending machine,pipe expanding machine,hydraulic press ,medium frequency and so on.

Notes:
1 The bevel machine should place flat,stable fixation,to avoid moving when using.when the power supply connect well,
   please pay attention to check the operation direction and transmission parts.

2 Let the bevel machine clamp the pipe,prevent the collision of tools,the
   pipe end and the feedings should be left between the 2-3mm gap,to prevent
  excessive feed first time,turn on the malecoupling when working,to avoid the second feed at the same time.

3 After the feed,should remain in situ rotate a few times,so that smooth the bevel, move the knife frame after operation,
   which away  from the cutting surface,and then remove the pipe.

4 Cooling system must be kept clean to prevent the impurities,iron filings into the oilway,blocking the nozzle.

5 After finished the work,need do maintenance work