219 Hydraulic elbow forming machine

1.       Cylinder: Inside OD180mm, Piston pole diameter: 140mm, stroke: 4m Pressure: 21Mpa 2pc.

           Max. pushing force of the two cylinder: 110T

           Working speed: 0-170cm/min,Max. return speed: 800cm/min

2.  Pump: 63Scy plunger pump 1 set, 18.5KW generator 1set (main working pump)

         CB-50 gear pump   1 set, 7.5kw generator   1 set (pushing and return pump)

         Hydraulic valve used integrated types of design, manual clamp board, manual loading.

3.       Main machine body frame: 18# channel steel, 18 kg steel rail welding.

4.       Main machine¡¯s panel: Welding by 18mm plate

5.       Power cabinet:1 set  . Operating cabinet 1set

6.       Medium frequency 250Kw

7.       Scope of supply:

   a. Main machine body 1 set, hydraulic pump 1set, Intermediate Frequency Power cabinet:1set front and back clamp board                                         each 1 set.

   b.  Medium frequency cabinet 1 set, reactor, capacitor 1 set, water cable 2 pc(L=2500mm) OD 219 heating coil  1pc

219 Hydraulic elbow forming machine

Hei Yan Group manufacture 219 Hydraulic elbow forming machine from 21mm to 1420mm and act to customer's need. Welcom to visit Hei Yan Group and contact for more details on elbow forming machine,pipe induction bending,pipe expanding,bevelling machine etc.

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.