Bending elbow machine

Product description
1.The bending elbow machine use seamless steel pipe,welded steel pipe,roll pipe as raw

materials.
2.The maximum diameter pipe made:1420mm
3.The maximum thickness is 20mm
4.The maximum thrust: 670(T)
5.Medium frequency power: 700-800(KW)

Main feature of bending elbow machine

1 power frequency and frequency are adjustable,to ensure proper temperature and 

material stability.
2 easy to operate, save energy, improve production efficiency,operate automatically.

Application of bending elbow machine

are widely used in petroleum,chemical,construction ,water conservancy and other fields.

We also supply medium frequency power supply,tee machine,hydraulic press,beveling machine.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.