Carbon steel elbow forming machine

Hei yan is specialized in manufacturing carbon steel elbow forming machine,following is the general introduce of our machine
Raw material of producing elbows: seamless steel pipe, welded steel pipe and rolled steel pipe.

 Specifications of the carbon steel elbow forming machine:
1. Production range: OD 21-1420mm 

2. Radius: 1D, 1.5D, 2D

3. Thickness: 3mm-100mm
4. Material: carbon steel 

5. Drive type: Hydraulic, Chain

Accessories of the process
 1. Intermediate frequency power source  2. Heating induction coil 3. Mandrels
 4. Hydraulic press5. Bevel machine
Hei yan also manufacture pipe bending machine,pipe expanding machine,hydraulic press,tee machine.

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.