Elbow Cold Extrusion Machine:

TheCold elbow making machine could manufacture the elbows ranging from 10"to 16" with thickness ranging from Sch10s to Sch80, the material could be stainless steel, carbon steel, alloy steel, nickel alloy, etc.

The feature of elbow forming machine is save energy improve production efficiency, operate automatically, easy to operate and so on.

1. Pushing plate and supporting plate strobe of Elbow making machine are all used hydraulic control .
Note: In order to improve efficiency, the pushing plate strobe also was changed to the hydraulic control .
2.Anterior supporting plate is equipped with clip pipe fittings.

Please kindly contact with us for your interested elbow forming machine,pipe bending machine,pipe expanding machine,hydraulic press,hot induction heating power.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also