Elbow Machine Diagram

This Elbow Machine Diagram use seamless steel pipe,welded steel pipe and spiral steel pipe as raw materials.

Technical parameter of Elbow Machine Diagram
Main cylinder Max. pushing force:160T
Main cylinder Inside OD125mm, outside OD152mm, piston pole diameter:90mm stroke:2500mm 
Pushing speed: 0-1000mm, return speed:7500mm  Max.working pressure:21Mpa
Medium frequency 160Kw,2500HZ

Our Elbow Machine Diagram are widely used in petroleum,chemical,construction ,water conservancy and other fields.

We also manufacture tee machine,pipe beveling machine,pipe grinding machine.

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.