Elbow making machine:

Hei Yan Group offer elbow making machine.
Hei Yan Elbow making machine is composed by: Hydraulic main pushing machine, hydraulic pump, operate panel, control panel of generators, medium frequency, compensating capacitor, water cable, induction coils adjust frame, reactor.

Elbow to push the system machine is used to push the system, various types of elbow pipe fittings. The device with double acting hydraulic cylinder type single-piston hydraulic cylinder, the system of machine to meet the elbow to push the use of features, long trip, stable operation, simple installation, sealing technology advanced, non-crawling and other characteristics to meet a variety of elbow to push the system equipment and special machinery and equipment use. To achieve customer satisfaction results.

Elbow making machine is designed and constructed not only for manufacturing the small radius (1.0D-1.5D) standard stainless steel elbow ranging from 1/2" to 24", but also for the carbon steel elbow. The specification (dimension, radius, thickness) of the finished products can meet the stipulated international standard. The machinery are fit for the batch production.

Please kindly contact with us for your interested elbow forming machine,pipe bending machine,pipe expanding machine,hydraulic press, hot induction heating power.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also