Elbow Pushing Machine:

Main components of Elbow Pushing Machine:
  Main pushing machine 
  Hydraulic pump station  
  Main machine control cabinet 
  Medium frequency    

Maintenance of Elbow Pushing Machine:
The equipment should be serviced about once a month, maintenance as follows:
Check each part of fasteners,ensure they are fixed..
Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings.
If the seal rings appear damaged or oil leakage,you should replace timely.
Operated this equipment within 1-2 months,you should clean the tank and filter hydraulic oil once.
When cleaning tank,you should clean the insides the oil filter of tank also.

Welcome to visit Hei Yan group to know more information about Elbow Pushing Machine.Our company professionally manufacture bending machine,pipe expanding machine,hydraulic press,medium frequency,beveling machine,tee machine,steel pipe,pipefittings and so on.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also