Elbow forming pushing machine
Elbow forming pushing machine equipment: electromotor, gear pump, axial plunger pump, single slide. entrance stent, clamping platform, the part of small swing arm, rocker spindle block, chief swing arm, slide chuck, hydraulic motor, under frame, support plate, push pedal etc.

Model of Elbow forming pushing machine:OD114,OD168,OD211,OD273,OD325,OD426,OD458,OD530,OD610¡ê?OD630,OD762,OD820,OD930,OD1067 etc.

Advantage of Elbow forming pushing machine: Hydraulic control system, automatic feeding system, counterpart device, fixed mandril, high precision, best pre-sales/after-sales service, do installation etc.

Welcome to contact with us for more informaiton of Elbow forming pushing machine, and your interested pipe bending machine,pipe expanding machine, hydraulic press,pipe beveling machine.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.