Elbow making machine

Elbow making machine is designed and constructed for manufacturing the carbon steel elbows with diameter from 21mm to 1420mm, thickness 3mm to 100mm. Drive type: Hydraulic, Chain
 
Main features of elbow making machine:
1. The elbow making machine is constructed with strong metal with good appearance and stable functioning.
 
2. The machine has individual construction and electrical system, adopts the two kinds of heating methods, high frequency and intermediate frequency, the speed of pushing could be randomly adjusted, the speed of adding raw material pipes is fast and the machine is easy to operate.
Welcome to visit Hei Yan Group, we would like to show our elbow making machine,pipe expanding machine,pipe bending machine, tee machine,hydraulic press and the assorted beveling machine, mould to you
 
 

1.Check each part of fasteners, ensure they are fixed.
2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also