Elbow manufacture machine

Elbow manufacture machine has individual power construction and electrical system, adopts the two kind of heating methods, Intermediate Frequency, the speed of pushing could be randomly adjusted, the speed of adding raw material pipes is fast and the Elbow manufacture machine is easy to operate.

Elbow produced scope: 25mm-1420mm  thickness:5mm-120mm
Angle: 22.5,45,90,135 degree and customer required angle.

Accessories for the progress
1. Intermediate frequency power source2. Heating induction coils
3. Mandrels
4. Hydraulic press

5. Beveling machine

Welcome to contact with us for elbow machine, we also manufacture,pipe expanding machine,pipe bending machine,medium frequency heating equipment according to customer requirement.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.