Exported elbow maker

Elbow Maker is designed and constructed for manufacturing the small radius (1D/1.5D) carbon steel elbows, alloy steel elbows. 
Hei Yan International can produce the following scope Exported elbow maker:
1. Raw pipe for elbow producing: Seamless steel pipe,welding steel pipe or coiled steel pipe
2. Production scope of forming machine:1"-60"
3. Thickness: 5mm - 120 mm
4.Angle available scope:22.5 degree ,45 degree,90 degree,135 degree.
5.The following parts shall be ready by customer :
a. cooling system (tank,water, pump,water shed, water pipeline low and above)
b. hydraulic oil : L-HM anti- wear hydraulic oil
c. connection cables
d. heating coils,mandrils according to production scope
e. related machine: press machine, cutting machine for ends of pipe .
Please kindly contact with us for your interested Exported elbow maker,pipe bending machine,pipe expanding machine,hydraulic press, hot induction heating power.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.