Exported hydraulic elbow maker

This Exported hydraulic elbow maker is designed for the processing of elbow.
We can produce diameter 21mm-1420mm, wall thickness 3mm-80mm, over 1D carbon steel, alloy steel elbow machine.
Exported hydraulic elbow maker specification (dimension, radius, thickness) of the finished elbows can meet the stipulated international standard, such as ANSI B16.9, ANSI B16.28, DIN2605, GB12459, etc  
Accessories for the progress
1. Intermediate frequency power source
2. Heating induction coils
3. Mandrels
4. Hydraulic press
5. Beveling machine
Welcome to visit Hei Yan, we would like to show our Exported hydraulic elbow maker,elbow forming machine,pipe expanding machine,pipe bending machine, tee machine, hydraulic press and the assorted beveling machine, mould to you.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.