Hot forming machine

Hei Yan Int'L Development Limited is the manufacturers specializing in producing Hot Forming Machine, as well as assorted bevel machine, mandrel, press mold, etc.

Hot Forming Machine is designed and constructed for manufacturing the small radius (1D/1.5D) carbon steel elbows, alloy steel elbows.
 
Hot Forming Machine is composing by:
 
hydraulic main pushing machine, bending degree adjustment device, hydraulic pump, medium frequency heating system, operate panel, control panel of generators, panel of capacitors, water cable, reactor.

please kindly contact with us for the Hot Forming Machine.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.