Hei Yan group manufacture Hydraulic cylinder elbow former.

Hydraulic cylinder elbow former is composed by: Hydraulic main pushing machine, hydraulic pump, operate panel, control panel of generators, medium frequency, compensating capacitor, water cable, induction coils adjust frame, reactor.

Main features:

1 It is constructed with strong metal with good appearance and stable functioning.
2 It has individual power construction and electrical system,adopts the two kind of heating methods,intermediate frequency,the speed of pushing could be randomly adjusted,the speed of adding raw material pipes is fast and the machine is easy to operate.

Working element of Cylinder pushing elbow machine:

put raw pipe to mandril -- put heating coils to raw pipe mandril open cooling water -- setup power of frequency source -- heating pipe to 750 degree -- start pushing of elbow.

Welcome to contact with us for Hydraulic elbow forming pushing machine, we also manufacture,pipe expanding machine,pipe bending machine,medium frequency heating equipment according to customer requirement.

1.Check each part of fasteners, ensure they are fixed.
2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also