Hydraulic cylinder elbow machine

This type hydraulic cylinder elbow machine can process elbows from 3/4" to 24".

This hydraulic cylinder elbow machine use seamless steel pipe,welded steel pipe and spiral steel pipe as raw materials.

These elbows are widely used in connection of the industrial pipelines for the Petrochemical, Gas and Oil pipes, Electrical Power, Food, etc.

This hydraulic cylinder elbow machine is easy to operate,it can save energy,improve production efficiency,operate automatically.

We also supply tee forming machine,pipe bending machine,pipe expanding machine,hydraulic press.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.