Hei Yan is one of the most professional manufacture of Hydraulic drive elbow pushing machine. Produce range from OD21-1420mm, the elbow machine is constructed with strong metal with good appearance and stable functioning. Elbow produced scope: 25mm-1420mm thickness:5mm-120mm Angle: 22.5,45,90,135 degree and customer required angle.
Accessories for the progress 1. Intermediate frequency power source 2. Heating induction coils 3. Mandrels 4. Hydraulic press 5. Beveling machine
The following parts shall be ready by customer: a. cooling system (tank, water pump, water shed, water pipeline low and above) b. hydraulic oil : L-HM anti- wear hydraulic oil c. connection cables d. heating coils, mandrils according to production scope e. related machine: press machine, cutting machine for ends of pipe, elbow testing machine . Welcome to contact with us for Hydraulic drive elbow pushing machine, we also manufacture,pipe expanding machine,Pipe bending machine,medium frequency heating equipment according to customer requirement.
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com
Maintenance and Repairment of China Elbow Machine 1 Check the fastener of every part to keep it in solid state. 2 Check if every joint of hydraulic pump station is installed with oil proof rubber seal ring, if any damage with it or oil leak, please change it as soon as possible. 3 If the forward or backward is not workable, first check if the magnetic valve works, if it operates well, check the sequence valve 6X3??¨¦overflow valve YF-L20H4 or whether one way unload valve 4HD3 is cut by impurities. (It is likely to happen when the machine begins to use). If it is cut, take it down, and wash it by gasonline or diesel, reload it. 4 Within 1-2 month after using, please wash the oil container and filtrate the hydraulic oil for once 5 When wahing the oil container, please wash the fuel inlet filter of every pump station.
