Induction Mandril Elbow Making Mahine

Hei yan group is specialized in manufacturing Induction Mandril Elbow Making Mahine to meet customers needs.Special efforts are made to customers.

Induction Mandril Elbow Making Mahine is used in Petrochemical industry, power industry, boiler industry etc.

Note: 1, Main pump can be used the same time when working, in general, using one. 
 2, Return pump can not be used the same time, only one start and one spare. 
 3, Feed pump can be used only when feeding .
 4, Main cylinder ,make the safe pressure at 25Mpa,make the attached cylinder safe pressure at 10MPa.

Hei Yan Group professionally manufacture Induction Mandril Elbow Making Mahine,bending machine,pipe expanding machine,medium frequency,steel pipe,pipefittings and so on.

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also