|
|
| Induction hydraulic elbow machine |
|
| Type:HYW |
| Specification:210mm~1420mm |
| Application:Petrochemical industry, power industry, boiler industry,pipeline,oil transmitting |
| Delivery:30~60 Days |
 |
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Induction hydraulic elbow machine
Induction hydraulic elbow machine express itself on petrochemical industry,power industry, boiler industry,pipeline,oil transmitting etc.
This equipment mainly consists of the following parts: the elbow making pushing machine,hydraulic pump,hydraulic system,operate panel,control panel of generators, intermediate frequency power supply,compensation capacitor,water cable,intermediate frequency coil adjustment frame,the reactor.
Driven by a double-cylinder ,when the induction hydraulic elbow machine arm is near the settleed point of bending,the hydraulic system will buffer automatically,improving the precision of reset and the work efficiency.Full hydraulic drive, micro-controller can be preset of 16 angle,the use of foot switch will complete the whole process.
The induction elbow machine can produce OD25mm-1420mm,wall thickness 5mm-120mm,angle 22.5,45,90,135 degree and customer required angle.
Hei Yan Group is able to manufacturer HYW induction hydraulic elbow machine accroding to customer requirement,these induction based pipe fitting machine is more and more popular in the industry.Welcom to visit Hei Yan Group for induction hydraulic elbow machine,pipe bevelling machine |
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
Item |
OD(mm)
|
Max.Thickness(mm)
|
Cylinder(pc)
|
Max. pushing power(t)
|
Medium frequency(KW)
|
|
1 |
OD1420 |
20 |
4 |
670 |
700-800 |
|
2 |
OD1220 |
20 |
4 |
600 |
600-650 |
|
3 |
OD1020 |
20 |
4 |
500 |
550-600 |
|
4 |
OD820 |
20 |
4 |
400 |
500-550 |
|
5 |
OD720 |
20 |
4 |
320 |
450-500 |
|
6 |
OD630 |
20 |
2 |
300 |
400-450 |
|
7 |
OD530 |
14 |
2 |
160 |
350-400 |
|
8 |
OD426 |
14 |
2 |
130 |
300-350 |
|
9 |
OD325 |
14 |
2 |
84 |
200-250 |
|
10 |
OD219 |
12 |
2 |
65 |
160-200 | |
|
|
|
Maintenance and Repairment of Induction hydraulic Elbow Machine
1 Check the fastener of every part to keep it in solid state.
2 Check if every joint of hydraulic pump station is installed with oil proof rubber seal ring, if any damage with it or oil leak, please change it as soon as possible.
3 If the forward or backward is not workable, first check if the magnetic valve works, if it operates well, check the sequence valve 6X3 overflow valve YF-L20H4 or whether one way unload valve 4HD3 is cut by impurities. (It is likely to happen when the machine begins to use). If it is cut, take it down, and wash it by gasonline or diesel, reload it.
4 Within 1-2 month after using, please wash the oil container and filtrate the hydraulic oil for once
5 When wahing the oil container, please wash the fuel inlet filter of every pump station. |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
