Machine for elbow steel

Machine for elbow steel could manufacture the elbows ranging from 1/2" to 4", the thickness range is from Sch10s to Sch80s.

The processing materials could be stainless steel, carbon steel, alloy steel, nickel alloy, etc. The raw material pipes could be spiral steel pipe.

 Components of machine for elbow steel

main machine body,console,electrical control cabinet,compensation capacitor,water lines,
medium frequency power supply,hydraulic pump station,and medium frequency coils trim holder.

Application of machine for elbow steel

Mainly used in petroleum,chemical,construction,water conservancy and other fields.

Hei Yan also supply medium frequency,power press,bender.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.