Machine pipe fitting

This Pipe fitting machine is designed for the processing of elbow.

We can produce diameter 21mm-1420mm, wall thickness 3mm-80mm, over 1D carbon steel, alloy steel elbow machine.

Main features of the Pipe fitting machine :

1. The pipe fitting machine is constructed with strong metal with good appearance and stable functioning.
 
2, Hydraulic pipe fitting machine has individual power construction and electrical system, adopts the two kind of heating methods, Intermediate Frequency, the speed of pushing could be randomly adjusted, the speed of adding raw material pipes is fast and the machine is easy to operate.

Please feel free to contact us for more details on Pipe fitting machine.

Maintenance of machine:

The equipment should be serviced about once a month, maintenance as following:

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.