Mandrel elbow former

Mandrel elbow former equipment: electromotor, gear pump, axial plunger pump, single slide. entrance stent, clamping platform, the part of small swing arm, rocker spindle block, chief swing arm, slide chuck, hydraulic motor, under frame, support plate, push pedal etc.
Model of Mandrel elbow former:OD114,OD168,OD211,OD273,OD325,OD426,OD458,OD530,OD610,OD630,OD762,OD820,OD930,OD1067 etc.
Main features:
1. The Mandrel elbow former is constructed with strong metal with good appearance and stable functioning.
2. The machine has individual construction and electrical system, adopts the two kinds of heating methods, high frequency and intermediate frequency, the speed of pushing could be randomly adjusted, the speed of adding raw material pipes is fast and the machine is easy to operate.
Welcome to contact with us for Mandrel elbow former, we also manufacture,pipe expanding machine,pipe bending machine,medium frequency heating equipment according to customer requirement.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.