Hei Yan is specialized in producing Medium frequency elbow machine
Specifications of Medium frequency elbow machine we manufactured: 1.Production range: OD 21-1420mm 2.Radius: 1D, 1.5D, 2D 3.Thickness: 3mm-100mm 4.Material: carbon steel 5.Drive type: Hydraulic, Chain
Advantage of Hei Yan Medium frequency elbow machine
Working pushing board, support board,clamp of elbow machine, we all do heat treatment, through annealing treatment to eliminate innerstress, has enough strength and rigidity, prevent perpetual deformation. Welcome to visit Hei Yan, we would like to show our elbow forming machine, Pipe expanding machine,pipe bending machine, tee machine, hydraulic press and the assorted beveling machine, mould to you.
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com
1.Check each part of fasteners, ensure they are fixed.
2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.
3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.
4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.
5.When cleaning tank, you should clean the inside the oil filter of tank also.
