|
|
| Medium frequency elbow machine |
|
| Type:HYW-1series |
| Specification:OD 21-1420mm |
| Application:Petrochemical industry, power industry, boiler industry |
| Delivery:30-60days |
 |
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Medium frequency elbow machine
Our factory is specialized in producing complete sets of medium frequency induction machine and Medium frequency elbow machine, bending machine, pipe expanding machine,we have been in the line for more than 10 years, products marketing throughout the world , covering a variety of metal melting, holding diathermy, heat treatment ,Steel pipe bending, corrosion prevention, pipe extending etc .The products we supplied, on the use of performance and after-sale service ,all have good reputation.
Specifications of Medium frequency elbow machine we manufactured:
Production range: OD 21-1420mm
Radius: 1D, 1.5D, 2D
Thickness: 3mm-100mm
Material: carbon steel
Drive type: Hydraulic, Chain
Hei Yan also manufacture pipe expanding machine,Pipe bending machine,hydraulic press,tee machine,hot induction heating equipment. |
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
Item |
OD(mm) |
Max.Thickness(mm) |
Cylinder(pc) |
Max. pushing power(t) |
Medium frequency(KW) |
|
1 |
OD1420 |
20 |
4 |
670 |
700-800 |
|
2 |
OD1220 |
20 |
4 |
600 |
600-650 |
|
3 |
OD1020 |
20 |
4 |
500 |
550-600 |
|
4 |
OD820 |
20 |
4 |
400 |
500-550 |
|
5 |
OD720 |
20 |
4 |
320 |
450-500 |
|
6 |
OD630 |
20 |
2 |
300 |
400-450 |
|
7 |
OD530 |
14 |
2 |
160 |
350-400 |
|
8 |
OD426 |
14 |
2 |
130 |
300-350 |
|
9 |
OD325 |
14 |
2 |
84 |
200-250 |
|
10 |
OD219 |
12 |
2 |
65 |
160-200 | |
|
|
|
| 1.Check each part of fasteners, ensure they are fixed.
2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.
3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.
4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.
5.When cleaning tank, you should clean the inside the oil filter of tank also. | | |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
