OD 726-46mm High Quality Elbow Forming Machine
High Quality Elbow Forming Machine is designed for the processing of elbow. We can produce diameter 21mm-1420mm, wall thickness 3mm-80mm, over 1D carbon steel, alloy steel elbow machine.

Following is the OD 729*46 High Quality Elbow Forming Machine's simple information:
Technical Data:
Max. produced elbow OD: 762mm
Min. produced elbow OD:219mm
Max. produced elbow thickness:46mm
Min. produced elbow thickness:16mm
OD 726-46mm High Quality Elbow Forming Machine consists: Host machine, Heating coils frame, Hydraulic system, Electric equipment system.
Host machine is made up of Based frame, Main cylinder, Cylinder fixing box, pushing box, Flashboard, Rail, Rod contacted with core etc.
Heating coils used 12# welding, can move forward and backward,the angel can be adjusted as your need.
Hydraulic system: container 8 mmm Generator: 22KW-2sets,15KW-1set,5.5kw-1set
Electric equipment system:1000KW medium frequency.
Welcome to visit Hei Yan, we would like to show our elbow forming machine, pipe expanding machine,pipe bending machine, tee machine, hydraulic press and the assorted beveling machine, mould to you.

1.Check each part of fasteners, ensure they are fixed.
2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also