Main Cylinder: Inside OD 140mm,Outside OD168mm,Stroke 4 meters.Two cylinders.Total pushing force:100 tons. Hydraulic pumps: 40Lm/r Pump 1 set with 15KW-4 Generator 1 set 32Lm/r Pump 1 set with 7.5KW-4 Generator 1 set 10Lm/r gear pump 1 set with 5KW-4 Generator 1 set Design of OD168mm Elbow Making Machine: Hydraulic pushing Hydraulic clamp cylinder Automatic lifting material Medium Frequency heating system All controllings are in one operation case. Fasting return speed: 1200mm/Min Pushing speed 0-50mm/Min
Welcome to visit Hei Yan, we would like to show our elbow forming machine, pipe expanding machine,pipe bending machine, tee machine, hydraulic press and the assorted beveling machine, mould to you.
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com
Maintenance and Repairment of Elbow Machine 1 Check the fastener of every part to keep it in solid state. 2 Check if every joint of hydraulic pump station is installed with oil proof rubber seal ring, if any damage with it or oil leak, please change it as soon as possible. 3 If the forward or backward is not workable, first check if the magnetic valve works, if it operates well, check the sequence valve 6X3 overflow valve YF-L20H4 or whether one way unload valve 4HD3 is cut by impurities. (It is likely to happen when the machine begins to use). If it is cut, take it down, and wash it by gasonline or diesel, reload it. 4 Within 1-2 month after using, please wash the oil container and filtrate the hydraulic oil for once 5 When wahing the oil container, please wash the fuel inlet filter of every pump station.
