Steel forming machine

With the development of steel pipe deep processing,Steel forming machine has got all-around technology improvement. Now our elbow machine has composited over short stress line, prod cast expand diameter technology.

1. Raw material that used to this Steel forming machine: seamless steel pipe
 
2. With the professional technician, we can design big size, medium size and small size elbow machine as per customers' requires.
 
3.Steel forming machine consists: Host machine, Heating coils frame, Hydraulic system, Electric  equipment system.

Hei Yan also manufacture pipe expanding machine,pipe bending machine,hydraulic press,tee machine,hot induction heating equipment.

1.Check each part of fasteners, ensure they are fixed.

2.Make sure that all connectors of the hydraulic pump station are equipped with oil seal rings, if the seal rings appear damaged or oil leakage, should be replace timely.

3.If found forward or backward abnormality, first check electro-hydraulic valve whether operate normal, if working normally, then you should check whether the electro-hydraulic relief valve or the one-way unloading valve has contaminant that made it could not working or not(this phenomenon usually happen when you just use this machine). If has contaminant, you should open it, clean by gasoline or diesl oil, everything is ok, then re-install.

4.Operated this equipment within 15 days, you should clean the tank and filter hydraulic oil once.

5.When cleaning tank, you should clean the inside the oil filter of tank also.