|
|
|
| 1500 T Six pillars hydraulic press |
|
| Type:HYY series |
| Specification:1500T |
| Application:suppression of plastic materials, bending, flanging, extrusion and other processes |
| Delivery:30-60days |
 |
TQ:
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
1500 T Six pillars hydraulic press
Hei Yan can supply various pressure hydraulic press, following is the simple description of the 1500 T Six pillars hydraulic press:
Main cylinder pressure:1500T
Main cylinder stroke: 450mm
Working table:1450*2400
Generator power:37KW
Optional accessories of the hydraulic press
1. Moving table 2. Ramming material device
3. Photo-electric protective device 4. PLC
5. Hydraulic system heating, cooling device 6. Heating device
7. Stroke, pressure showing digital control device 8. Industrial touch screen
We also specialized in manufacturing elbow machine,tee machine,beveling machine,pipe bending machine |
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
MODEL |
HYD-500 |
HYD-600 |
HYD-800 |
HYD-1000 |
HYD-1200 |
HYD-1500 |
|
Capacity |
TON |
500 |
600 |
800 |
1000 |
1200 |
1500 |
|
Table Size L.R. * F.B. |
mm |
2200*1500 |
2500*1800 |
2800*2000 |
3000*2200 |
3200*2400 |
3600*2500 |
|
Day-light |
mm |
1350 |
1500 |
1600 |
1600 |
1800 |
2000 |
|
Stroke |
mm |
1000 |
1100 |
1200 |
1200 |
1300 |
1500 |
|
Descending Speed |
mm/sec |
300 |
300 |
300 |
300 |
300 |
300 |
|
Pressing Speed |
mm/sec |
10-20 |
10-20 |
10-20 |
10-20 |
10-20 |
10-20 |
|
Ascending Speed |
mm/sec |
250 |
250 |
250 |
250 |
250 |
250 |
|
Cushion Capacity |
TON |
200 |
250 |
300 |
400 |
450 |
500 |
|
Cushion Stroke |
mm |
350 |
400 |
450 |
450 |
450 |
500 |
|
Motor |
HP |
75 |
100 |
125 |
150 |
175 |
200 | |
|
|
|
Hydraulic press safe operating attention
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches. |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
|
|
|
