|
|
| 4 column hydraulic press 150 ton |
|
| Type:HYY |
| Specification:150 T |
| Application:Drawing,bending,flanging,cold extruding,blanking processes for metal materials,straightening |
| Delivery:60-90 days |
 |
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
4 column hydraulic press 150 ton
4 column hydraulic press 150 ton are suitable for the pressing, drawing, edging, bending, adjusting, cold installing, cold and hot forging and etc for metal and non-metal materials.
Feature of 4 column hydraulic press 150 ton:
working pressure of this series of hydraulic machines can be adjusted in the certain scope during working process according to the technical requirement.
The power system are controlled by keyboards
Achieve to three operation way:adjusting, manually and semi-automatically
4 column hydraulic press 150 ton is a small machine,but structures are strong enough,easy to maintenance and repair.
Hei Yan also supply elbow forming machine,Tee machine,induction pipe bending machine etc.
|
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
Data/ mode |
HYY-100 |
HYY-150 |
HYY-200 |
HYY-250 |
HYY-300 |
HYY-400 |
HYY-500 |
HYY-600 |
HYY-800 |
|
Capacity
(T) |
100 |
150 |
200 |
250 |
300 |
400 |
500 |
600 |
800 |
|
Table area
(LRXFB)
(mm) |
800*1000 |
900*1200 |
1000*1200 |
1000*1500 |
1200*1500 |
1200*1800 |
1200*1800 |
1500*2000 |
2000*2500 |
|
Open height
(mm) |
650 |
800 |
950 |
950 |
1100 |
1100 |
1100 |
1250 |
1500 |
|
Stroke(mm) |
500 |
600 |
700 |
700 |
800 |
800 |
800 |
900 |
1000 |
|
Descending speed(mm/sec) |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
|
Pressing speed(mm/sec) |
9/25 |
10/30 |
10/25 |
7.5/25 |
7/20 |
8/20 |
8/20 |
8/20 |
7/16 |
|
Ascending speed(mm/sec) |
220 |
235 |
250 |
250 |
250 |
250 |
250 |
250 |
240 |
|
Cushion capacity
(mm) |
30 |
60 |
70 |
100 |
100 |
150 |
150 |
200 |
250 |
|
Cushion stroke
(mm) |
200 |
250 |
250 |
300 |
300 |
350 |
350 |
400 |
400 | |
|
|
|
|
Hydraulic press safe operating attention
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches. | |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
