|
|
| 4 column press |
|
| Type:HYY series |
| Specification:4 column |
| Application:Drawing,bending,flanging,cold extruding,blanking processes for metal materials,straightening |
| Delivery:30-60days |
 |
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
4 column press
Characteristics of 4 column press: Four-three beams structure, through optimal design by the computer, simple, economical and suitable. Hydraulic control valve used shanghai high quality valve, It's reliability, with long life and small hydraulic shock. Independent electrical control system, reliable, intuitive movement and easily maintenance. The 4 column press adopts Centralized control by the button, setting adjustment (inching), single (semi-auto) two kinds of mode operation. This way can realize setting process and setting pressure. Working pressure, stroke can be adjusted according to the technical needs in the limited range.
Technical data of 4 column press:
1.Main cylinder pressure: 500T Main cylinder stroke:1000mm
Down cylinder pressure:100 T Down cylinder stroke:300mm
Max. opening distance: 1400mm Motor power:22Kw
Working table:1200mm*1200mm
2. Optional accessories of 4 column press: buffering equipment, moving work table, light curtain safety device, oil cooling equipment, touch screen, feeding device, mould clamping equipment, imported PLC, mechanism with floating guide and scroll bracket, hydraulic system, slider locking mechanism.
Hei Yan also manufacture elbow forming machine,pipe expanding machine,pipe bending machine,hydraulic press,tee machine,hot induction heating equipment. |
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
Data/ mode |
HYY-100 |
HYY-150 |
HYY-200 |
HYY-250 |
HYY-300 |
HYY-400 |
HYY-500 |
HYY-600 |
HYY-800 |
|
Capacity
(T) |
100 |
150 |
200 |
250 |
300 |
400 |
500 |
600 |
800 |
|
Table area
(LRXFB)
(mm) |
800*1000 |
900*1200 |
1000*1200 |
1000*1500 |
1200*1500 |
1200*1800 |
1200*1800 |
1500*2000 |
2000*2500 |
|
Open height
(mm) |
650 |
800 |
950 |
950 |
1100 |
1100 |
1100 |
1250 |
1500 |
|
Stroke(mm) |
500 |
600 |
700 |
700 |
800 |
800 |
800 |
900 |
1000 |
|
Descending speed(mm/sec) |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
|
Pressing speed(mm/sec) |
9/25 |
10/30 |
10/25 |
7.5/25 |
7/20 |
8/20 |
8/20 |
8/20 |
7/16 |
|
Ascending speed(mm/sec) |
220 |
235 |
250 |
250 |
250 |
250 |
250 |
250 |
240 |
|
Cushion capacity
(mm) |
30 |
60 |
70 |
100 |
100 |
150 |
150 |
200 |
250 |
|
Cushion stroke
(mm) |
200 |
250 |
250 |
300 |
300 |
350 |
350 |
400 |
400 | |
|
|
|
Hydraulic press safe operating attention
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches | |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
