|
|
| 800T Four columns Hydraulic press in China |
|
| Type:HYY series |
| Specification:800T |
| Application:applied to press, bale,reforming-practical and economical.with simple structure |
| Delivery:30-60days |
 |
TQ:
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
800T Four columns Hydraulic press in China
Usage of the 800T four colums hydraulic press:
This series of hydraulic presses are used to deep drawing, bending, flanging, cold extrusion, stamping and other craft of metal material, also suitable for calibration, pressure mounted, powder products, abrasive products, pressing and plastic products, insulation materials repression forming.
Technical data of 800T Four columns Hydraulic press in China:
Main cylinder pressure: 800T Main cylinder stroke:1200mm
Down cylinder pressure:315 T Down cylinder stroke:400mm
Max. opening distance: 1600mm Motor power:37Kw
Working table:1800mm*1600mm
Welcome to visit Hei Yan, we would like to show our elbow forming machine, pipe expanding machine,pipe bending machine, tee machine, hydraulic press and the assorted beveling machine, mould to you.
|
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
Model |
Ejector force
(KN) |
Nominal capacity
(KN) |
Cylinder stroke
(MM) |
Max opening height
(MM) |
Size of worktable
(mm) |
|
HYY-35T |
100 |
350 |
300 |
450 |
350*300 |
|
HYY-50T |
150 |
500 |
350 |
550 |
400*400 |
|
HYY-63T |
300 |
630 |
380 |
550 |
450*420 |
|
HYY-80T |
300 |
800 |
400 |
550 |
500*500 |
|
HYY-100T |
400 |
1000 |
500 |
650 |
600*600 |
|
HYY-150T |
500 |
1500 |
600 |
750 |
650*650 |
|
HYY-180T |
630 |
1800 |
600 |
750 |
700*700 |
|
HYY-200T |
800 |
2000 |
700 |
900 |
800*800 |
|
HYY-250T |
1000 |
2500 |
700 |
900 |
900*870 |
|
HYY-315T |
1500 |
3150 |
800 |
1000 |
1000*1000 |
|
HYY-500T |
2000 |
5000 |
800 |
1200 |
1200*1200 |
|
HYY-630T |
2000 |
6300 |
900 |
1400 |
1600*1400 |
|
HYY-800T |
2500 |
8000 |
1000 |
1600 |
2000*1600 |
|
HYY-1000T |
3150 |
10000 |
1200 |
1800 |
2000*1800 | |
|
|
|
|
Hydraulic press safe operating attention
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches | |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
