|
|
| Columns hydraulic press |
|
| Type:HYY series |
| Specification:500-3000T |
| Application:petroleum,chemical,construction ,water conservancy and other fields |
| Delivery:30-60days |
 |
|
|
|
| |
Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
Columns hydraulic press
Professional equipment for forming of pipe fittings, correcting of pipe fittings, tension, bending and metal punching.
Specification of Columns hydraulic press:
Grades: 500tons, 1000tons, 2000tons, 2500tons, 3000tons
Construction types: columns, Frame
Material: Carbon steel, Alloy steel, Stainless steel
Accessories for the progress
1. Moulds
2. Hydraulic oil
Welcome to contact Hei Yan for the Columns hydraulic press and other elbow forming machine,pipe expanding machine,pipe bending machine you are interested in. |
| |
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
|
|
|
Data/ mode |
HYY-100 |
HYY-150 |
HYY-200 |
HYY-250 |
HYY-300 |
HYY-400 |
HYY-500 |
HYY-600 |
HYY-800 |
|
Capacity
(T) |
100 |
150 |
200 |
250 |
300 |
400 |
500 |
600 |
800 |
|
Table area
(LRXFB)
(mm) |
800*1000 |
900*1200 |
1000*1200 |
1000*1500 |
1200*1500 |
1200*1800 |
1200*1800 |
1500*2000 |
2000*2500 |
|
Open height
(mm) |
650 |
800 |
950 |
950 |
1100 |
1100 |
1100 |
1250 |
1500 |
|
Stroke(mm) |
500 |
600 |
700 |
700 |
800 |
800 |
800 |
900 |
1000 |
|
Descending speed(mm/sec) |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
300 |
|
Pressing speed(mm/sec) |
9/25 |
10/30 |
10/25 |
7.5/25 |
7/20 |
8/20 |
8/20 |
8/20 |
7/16 |
|
Ascending speed(mm/sec) |
220 |
235 |
250 |
250 |
250 |
250 |
250 |
250 |
240 |
|
Cushion capacity
(mm) |
30 |
60 |
70 |
100 |
100 |
150 |
150 |
200 |
250 |
|
Cushion stroke
(mm) |
200 |
250 |
250 |
300 |
300 |
350 |
350 |
400 |
400 | |
|
|
|
Hydraulic press safe operating attention
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches |
|
|
|
|
|
| Your Demand,Our Liability TEL:0086-13931764957 E-mail:ceo@xnmac.com |
|
 |
Related Products |
|
|
|
|
|
