Elbow compression hydraulic press

Characteristics of Elbow compression hydraulic press:
The series equipment is mainly designed for carbon steel, stainless steel 1D, 1.5D elbow pushed into the cold type, pushing system means a steel ball through the ball back into the system and push mandrel forming the system are two core push rod system with a semi-automatic molding machine stripping device.

The host including body, frame, clamping cylinder, side pushing cylinder, stripping agency group, and control institutions by the power station, stopper, piping and electrical control box, action containers.

Forming principle of Elbow compression hydraulic press:

Tube in the external cavity mode locking of the tunnel was hydraulic roof paragraph from the guide rod into the set up with the core of the forming chamber bending by the removal material ejection device, all adopt by PLC intelligent operation.
Please kindly contact with us for your interested elbow forming machine,pipe bending machine,pipe expanding machine,hydraulic press, hot induction heating power.

Hydraulic press safe operating attention
 
1. Before starting, check parts of press manipulation, clutch and brakes are active, the security guard is complete and easy to use, whether ministries crank exception. If abnormal, should immediately take the necessary measures
2. Before formal operating subject to idle test, be sure each part can normal work.
3. The operation must use the tools, is prohibited by hand directly into his mouth extract die, hand tool should not be putted on the mold.
4. Foot must be far away from the foot pedals, when adjust or get the workpiece in mould area.
5. Sudden power off or operate finished, we should close the power, and restored to the clutch in neutral gear manipulator, brake in braking.
6. On the press for maintenance, adjustment and installation, adjustment, dismantling the mold should be disconnected the machine energy (such as electricity, gas, liquid). Putting warning notice on the startup switches